Products : Specialty Chemicals & Intermediate products and their Specification

Specialty Chemicals & Intermediate products and their Specification
Agrochemical formulations Specification | Agrochemical Active Ingredients
 

Sabero has three business divisions. They are: Specialty Chemicals & Intermediates (SC&I), Agrochemical Active Ingredients (AAI) and Agrochemical Formulations (AF).
The Specialty Chemicals & Intermediates division manufactures organophosphorous intermediates such as TMP, DETC, PCl3 that are used as the building blocks for the manufacturing of pesticides such as profenophos, chloropyriphos, triazophos and D.D.V.P  which are the world's largest selling insecticides. In addition, the company manufactures PMIDA, an intermediate for Glyphosate, the world's largest selling herbicide.

Following are the Specialty Chemicals & Intermediate products and their specification

TRI ETHYL PHOSPHITE
Sr.No Characteristics General Specification Typical Specification
1
 Appearance Clear Colourless, Liquid. Clear Colourless, Liquid.
2
 Ethanol and low boilers by GC 0.15% Max. 0.15% Max.
3
 Tri Ethyl Phosphite (TEP) By GC 99.00% Min. 99.3 - 99.6%
4
 Di Ethyl Hydrogen Phosphite
(DEPH) by GC		 0.5% Max. 0.02% Max.
5
 Di Ethyl Ethyl Phosphonate
(DEEP) by GC		 0.1% Max. 0.05% Max.
6
 Tri Ethyl Phosphate (TEPO) by GC 0.20% Max. 0.05% Max.
7 DEPI by GC 0.05% 0.20% MaX.
<<Back | Top

TRI METHYL PHOSPHITE
Sr.No Characteristics General Specification Typical Specification
1
 Appearance Clear Colourless, Liquid. Clear Colourless, Liquid.
2
 Methanol by GC 0.25% Max. 0.15% Max.
3
 Tri Methyl Phosphite (TMP) By GC 99.00% Min. 99.50% Min.
4
 Di Methyl Hydrogen Phosphite (DMPH) by GC 0.25% Max. 0.15% Max.
5
 Di Methyl Methyl Phosphonate (DMMP) by GC 0.10% Max. 0.05% Max.
6
 Tri Methyl Phosphate (TMPO) by GC 0.30% Max. 0.15% Max.
<<Back | Top

DI ETHYL THIO PHOSPHORYL CHLORIDE
Sr.No Characteristics General Specification Typical Specification
1
 Appearance Clear Colourless to Pale Yellow Coloured Liquid Clear Colourless to Pale Yellow Coloured Liquid
2
 Low boilers by GC 0.75 % Max. 0.3% Max.
3
 Tri Methyl Phosphite (TMP) By GC 99.00% Min. 99.50% Min.
4
 O,O-Di Ethyl Thio Phosphoryl Chloride by GC 98.50 % Min. 99 + % Min.
5
 High boilers by GC 0.75 % Max. 0.70 % Max.
6
 Specific Gravity 1.18 Min. 1.18 Min.
<<Back | Top

PHOSPHORUS TRI CHLORIDE
Sr.No Characteristics General Specification Typical Specification
1
 Appearance Clear Colourless to light Yellow Coloured Liquid Clear Colourless to light Yellow Coloured Liquid
2
 Phosphorus Tri Chloride By GC 99.0 % Min. 99.5 % Min.
3
 Phosphorus Oxy Chloride By GC 0.50 % Max. 0.50 % Max.
4
 Boiling Range 75.0 – 76.5 °C 75.0 – 76.5 °C
5
 Specific Gravity 1.55 – 1.58 1.55 – 1.57
<<Back | Top
PHOSPHORUS THIOCHLORIDE
Sr.No Characteristics General Specification Typical Specification
1
 Appearance Clear Colourless Liquid Clear Colourless Liquid
2
 Phosphorus Thio Chloride By GC 98.50 % Min. 99% Min.
3
 Phosphorus Tri Chloride By GC 1.00 % Max. 0.70% Max.
4
 Phosphorus Oxy Chloride By GC 0.50 % Max. 0.30% Max.
5
 Specific Gravity 1.61 – 1.63 1.61 – 1.63
6 Boiling Range 122 – 124 °C 122 – 124 °C
<<Back | Top
PHOSPHORUS PENTASULPHIDE (P2S5)
Sr.No Characteristics Specification
1
 Appearance Yellowish green to greenish free flowing powder.
2
 Reactivity 6oC minutes Min. by IPA – Benzene method.
3
 Insoluble in Ethanol 00.15% Max. by mass
4
 Phosphorus Content 27.8 — 28.4 % by mass
5
 Sulfur Content 71.6 — 72.2 % by mass.
<<Back | Top
N — (PHOSPHONOMETHYL) IMINODIACEDIC ACID (PMIDA)
Sr.No Characteristics Specification
1
 Appearance White Powder
2
 PMIDA 95 — 99%
3
 Water 0.5% Max.
<<Back | Top
DIMETHYL PHOSPHITE (DMP)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid
2
 Methanol by GC 00.50% Max.
3
 Di Methyl Phosphite (DMP) by GC 98.00% Min.
4
 Tri Methyl Phosphate (TMPO) by GC 00.50% Max.
5
 Specific gravity Acid number as mg 1.195 Min.
6 KOH/gm 04.00 Max.
<<Back | Top
DIETHYL PHOSPHITE (DEP)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid
2
 Ethanol by GC 00.50% Max.
3
 Diethyl Phosphite (DEP) by GC 98.00% Min.
4
 Tri Ethyl Phosphate (TEPO) by GC 00.80% Max.
5
 Specific gravity Acid number as mg 1.06 Min.
6 KOH/gm 05.00 Max.
<<Back | Top
DI METHYL METHYL PHOSPHONATE (DMMP)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid
2
 Methanol by GC 00.50% Max.
3
 Di Methyl Methyl (DMMP) by GC 98.00% Min.
4
 Tri Methyl Phosphate (TMPO) by GC 00.50% Max.
5
 Specific gravity 1.145 Min.
6 Acid number as mg KOH/gm 02.00 Max.
<<Back | Top
DI ETHYL ETHYL PHOSPHONATE (DEEP)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid
2
 Ethanol by GC 00.50% Max.
3
 Di Ethyl Ethyl Phosphate (DEEP) by GC 98.00% Min.
4
 Tri Ethyl Phosphate (TEPO) by GC 01.00% Max.
5 Acid number as mg KOH/gm 02.00 Max.
<<Back | Top
TRI PHENYL PHOSPHITE (TPP)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid
2
 Tri Phenyl Phosphite (TPP) by GC 98.00% Min.
3
 Specific gravity 1.18 Min.
4 Acid number as mg KOH/gm 02.00 Max.
<<Back | Top
TRI BUTYL PHOSPHATE (TBP)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid
2
 Tri Butyl Phoshate (TBP) by GC 98.00% Min.
3
 Specific gravity 00.96 Min.
<<Back | Top
HYDROXY ETHYLEDENE PHSOPHONIC ACID (HEDP)
Sr.No Characteristics Specification
1
 Appearance Limpid Liquid
2
 HEDP Content 60.00% Min.
3
 Phosphorus Acid Content 02.00% Max.
4
 Acetic Acid Content 02.00% Max.
5
 Specific gravity 01.43 Min.
<<Back | Top
O, O DI METHYL THIO PHOSPHORYL CHLORIDE (DMTC)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless Liquid with Characteristic smell.
2
 L.B. by G.C. 03.00% Max.
3
 Mono Ester by G.C. 02.00% Max.
4
 DMTC by GC 92.00% Min.
5 Tri Ester by G.C. 05.00%0
<<Back | Top
PHOSPHORUS OXYCHLORIDE (POCl3)
Sr.No Characteristics Specification
1
 Appearance Clear Colourless to Light Yellow Coloured Liquid.
2
 Phosphorsu Oxychloride (POCl3) by G.C. 99.00% Min.
3
 Phosphorus Oxychloride (POCl3) by Classical Method. 98.00% Min.
4 Specific gravity 1.63 Min.
<<Back | Top
<<Back | Top